Aruba Certified Switching Associate (ACSA) (HPE6-A72) Certification

Complete list of current Q & A>>

Aruba Certified Switching Associate (ACSA) (HPE6-A72) – Quiz

1 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

1. Which statement is correct regarding powering an Aruba Access Point?

A. PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.

B. Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.

C. PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

D. Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.

2 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

2. What connectivity commands are available on AOS-CX switches? (Choose two.)

A. netstatus

B. traceroute

C. ping

D. pathping

E. tracert

3 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

3. What command displays information regarding the secondary image installed on an AOS-CX switch?

A. show secondary

B. show version detail

C. show version

D. show images

4 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

4. What is the binary conversion of the hexadecimal value 0x2001?

A. 0010 0001

B. 0002 0000 0000 0001

C. 0011 0000 0000 0001

D. 0010 0000 0000 0001

5 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

5. What command will save your configuration on an Aruba AOS-CX switch so that your changes automatically load on next reboot?

A. copy running-config checkpoint startup-config

B. copy startup-config running-config

C. copy running-config initial-checkpoint

D. copy running-config default

6 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

6. What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)

A. routing loops

B. costs associated with upgrading from copper to fiber

C. multiple frame copies leading to instability of the MAC address table

D. security issues with a redundant loop indicating to hackers that a back-door exists

E. broadcast storms

7 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

7. What are the commands to disable SSH and HTTPS services from the default VRF?

A. Core-1(config)# no ssh server Core-1(config)# no https-server

B. Core-1# no ssh server vrf default Core-1# no https-server vrf default

C. Core-1(config)# no ssh server enable Core-1(config)# no https-server enable

D. Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default

8 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

8. Which two options are the Layer 3 Routing protocols? (Choose two.)

A. BGP

B. LLDP

C. OSPF

D. MPLS

E. 802.3ad

9 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

9. Your customer has 349 users in a two-story building.
What are two benefits of a 2-Tier design? (Choose two.)

A. Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.

B. Improved performance by offloading processing from the Access layer to the Core.

C. Use of layer 2 switches at the access layer can process and route traffic from attached APs.

D. Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.

E. Provides a more cost effective solution given that no additional switches are required for a third tier.

10 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

10. What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)

A. Router ID

B. Priority

C. Hello and Dead intervals

D. Area ID

E. Process ID

11 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

11. What are two features of the three-tier designs? (Choose two.)

A. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments

B. adds a distribution layer to free up resources from the Core for improved performance and routing throughput

C. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments

D. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer

E. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided

12 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

12. ServiceOS login: admin –

SVOS> password –
Enter password: ********
Confirm password: ********
The login password to access an Aruba AOS-CX was lost. After connecting to the switch console port, a reboot is performed and the Service OS console is accessed as shown above.
What is the default password that is required for the admin account while under the Service OS console?

A. No password is set for this account.

B. "password"

C. "forgetme!"

D. The same login password that has lost originally.

13 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

13. What is true about VSX? (Choose two.)

A. VSX is ideal for Campus access layer deployments where ease of deployment is needed.

B. VSX allows upgrading members with near zero downtime or loss of packets.

C. VSX is available on all Aruba OS-CX switches except the 6300F model.

D. VSX is implemented on static port switches. VSX-plus needed to stack chassis together.

E. VSX run separate control planes to reduce latency and improve performance.

14 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

14. Core# configure terminal –

Core(config)# vrf Green –

Core(config-vrf)# exit –
Core(config)#

Core(config)# interface vlan 50 –
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?

A. Core(config-if-vlan)# vrf attach Green

B. Core(config-if-vlan)# ip vpn-instance Green

C. Core(config-if-vlan)# ip vrf forwarding Green

D. Core(config-if-vlan)# routing-context Green vrf

15 / 15

Category: Aruba Certified Switching Associate (ACSA) (HPE6-A72)

15. What is the correct description of a Multi-Layer Switch?

A. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

B. any switch that supports PoE, LLDP-MED and Flow Control

C. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

D. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

Your score is