Cisco Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Certification

Complete list of current Q & A>>

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) – Quiz

1 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which QoS model allows hosts to report their QoS needs to the network?

A. IntServ

B. CB-WFQ

C. DiffServ

D. MQC

2 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

What does DWDM use to combine multiple optical signals?

A. IP protocols

B. wavelength

C. time slots

D. frequency

3 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

An engineer working for telecommunication company needs to secure the LAN network using a prefix list.
Which best practice should the engineer follow when he implements a prefix list?

A. An engineer must identify the prefix list with a number only.

B. The final entry in a prefix list must be /32.

C. An engineer must include only the prefixes for which he needs to log activity.

D. An engineer must use nonsequential sequence numbers in the prefix list so that he can insert additional entries later.

4 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?

A. flowspec address-family ipv4 local-install interface-all

B. flowspec address-family ipv4 install interface-all local

C. flowspec address-family ipv4 install interface-all

D. flowspec address-family ipv4 local-install all-interface

5 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which MPLS design attribute can you use to provide Internet access to a major customer through a separate dedicated VPN?

A. The Internet gateway router is connected as a PE router to the MPLS backbone.

B. The CE router supports VRF-Lite and the full BGP routing table.

C. The Internet gateway inserts the full Internet BGP routing table into the Internet access VPN.

D. The customer that needs the Internet access service is assigned to the same RTs as the Internet gateway

6 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which statement describes the advantage of a Multi-Layer control plane?

A. It provides multivendor configuration capabilities for Layer 3 to Layer 1.

B. It automatically provisions, monitors, and manages traffic across Layer 0 to Layer 3.

C. It supports dynamic wavelength restoration in Layer 0.

D. It minimizes human error configuring converged networks

7 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tailend router?

A. path

B. tear

C. error

D. reservation

8 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which additional feature does MPLS DiffServ tunneling support?

A. matching EXP and DSCP values

B. PHB layer management

C. using GRE tunnels to hide markings

D. interaction between MPLS and IGP

9 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which component is similar to an EVPN instance?

A. router distinguisher

B. MPLS label

C. IGP router ID

D. VRF

10 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Why do Cisco MPLS TE tunnels require a link-state routing protocol?

A. The link-state database provides segmentation by area, which improves the path-selection process.

B. The link-state database provides a data repository from which the tunnel endpoints can dynamically select a source ID.

C. Link-state routing protocols use SPF calculations that the tunnel endpoints leverage to implement the tunnel.

D. The tunnel endpoints use the link-state database to evaluate the entire topology and determine the best path.

11 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two.)

A. The dynamic path option is supported only with IS-IS.

B. Tunnels can be configured with dynamic path or explicitly defined path

C. A zero bandwidth tunnel is not a valid option.

D. The bandwidth statement creates a ג€hardג€ reservation on the link

E. Tunnel links inherit IGP metrics by default unless overridden

12 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which configuration mode do you use to apply the mpls ldp graceful-restart command in IOS XE Software?

A. MPLS LDP neighbor

B. interface

C. MPLS

D. global

13 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

After you analyze your network environment, you decide to implement a full separation model for Internet access and MPLS L3VPN services.
For which reason do you make this decision?

A. It enables EGP and IGP to operate independently.

B. It enables you to choose whether to separate or centralize each individual service.

C. It is easier to manage a system in which services are mixed.

D. It requires only one edge router

14 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

Which statement about the Cisco MPLS TE forwarding adjacency feature is true?

A. It enables the MPLS core to use EIGRP as the routing protocol.

B. It enables the Cisco MPLS TE tunnel to be advertised into the running IGP.

C. It enables the tailend router to advertise routes to the headend router over the tunnel.

D. It enables the headend and tailend routers to establish a bidirectional tunnel.

15 / 15

Category: Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501)

While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.
After you issue this command, which BGP packets does the PE accept?

A. to 2.2.2.2, with a TTL of 2 or more

B. from 2.2.2.2, with a TTL of less than 2

C. to 2.2.2.2, with a TTL of less than 253

D. from 2.2.2.2, with a TTL of 253 or more

Your score is